Setting up a Brick Paver Walkway or Brick Making Plant

The usage of Setting up a Brick Paver Walkway or Red Wall Bricks or Pavers to develop a sidewalk or patio area matches a home in a manner in which is unequaled. It includes a level of quality and sophistication to a house entrance that can not be achieved with either concrete or asphalt. Brick and Pavers likewise come in several colors and shapes enabling for special color schemes and patterns to be attained. In addition, setting up a Brick or Paver pathway does not always need a pro. With some fundamental understanding and a fairly basic sidewalk plan, a house owner is capable of carrying out such a task.

The key to installing a Brick or Paver Walkway is to very first effectively prepare the area where the bricks/pavers are to be set up. The location ought to be dug out a minimum of a foot down, removing all topsoil and clay soil. In addition, string lines must be strung on each side of the walkway. The string lines indicate the finished height of the walkway.
As soon as the location has been dug, 3/4" gravel stone should be laid in and tamped down firmly. 2" of sand, or stone dust ought to be spread over the gravel. Once again the sand/stone dust ought to be tamped down. Stone dust is chosen. The height between the tamped down sand and the stringline ought to equate to the density of the brick or paver.

Now that you have a steady base, place a 1" pipe or journal board the length of the pathway on either side of the pathway. Then using a flatedge, e.g. a 2"x4" board, slide it over the 2 lengths of the pipe/ledger board. In doing this you will create a level area to lay the bricks/pavers.

Now location on the level sand/stone dust strips of plastic brick borders. Install a work on both sides of the ready area. These strips will function as your pathway border and assistance to maintain the stability and shape of the sidewalk. You can get these plastic strip borders at most house improvement shops. The strips must be anchored down with 12" galvinized nails. You should sink these nails into the ground and through the strips every foot.

The key to laying the bricks/pavers is to make sure that they interlock with each other. Constantly stagger adjacent rows of bricks by 1/2 of a brick to interlock them. This will again assist preserve the stability of the sidewalk.

Inevitably bricks/pavers will need to be cut or divided when constructing the walkway. To actually cut/split the brick/paver, lay it in a bed of sand and location the sculpt at a 75 degree angle over the spot where you want to break the brick. If your sidewalk has curves you will require to buy/rent a wetsaw.

After setting up the bricks, develop the outdoors edges with extra sand, and then shovel in the topsoil and pack down firmly.
Spread stone dust over the new sidewalk and sweep into the fractures. Repeat this process a number of times to guarantee the fractures are fully filled. This will complete the interlocking of the bricks and help to remove any weed growth. Simply add lawn seed to the outdoors edges and you should have a gorgeous entryway to your house within a couple of weeks.


In addition, setting up a Brick or Paver walkway does not always require a pro. The secret to installing a Brick or Paver Walkway is to very first appropriately prepare the area where the bricks/pavers are get more info to be installed. Now that you have a steady base, position a 1" pipe or journal board the length of the walkway on either side of the pathway. These strips will act as your sidewalk border and help to keep the integrity and shape of the sidewalk. Inevitably bricks/pavers will need to be cut or split when constructing the walkway.

Leave a Reply

Your email address will not be published. Required fields are marked *